Manual & Safety - LG-CLPC-(75/150) - Discontinued!

12V/24V Cigarette Lighter Power Cable

Model LG-CLPC-(75/150)

Package Contents

1 x 12V/24V Cigarette Lighter Power Cable

⚠ WARNINGS & Safety Information

Before using the device, carefully read this manual.
Keep this manual either downloaded or printed in a safe place for later use. It contains important information.
Never connect the device to 230/110/mains voltage! This is extremely dangerous.
Avoid placing any objects that could short-circuit the power cables.
Securely connect the cables to the device. Compatible cable connectors must be used.
Do not cover or obstruct the device to allow for proper heat dissipation.
The device should not be opened or repaired by unauthorized personnel.
To prevent damage from water or moisture, the device must not be used in wet or humid environments.
Only use the device within the specified limits. Do not overload the device.
Do not extend the wires of this device.
Do not pull the cable or use any other force. Always unplug the device by grabbing the plastic part of the plug.
Ensure the total power consumption of the connected device does not exceed the cigarette lighter socket's maximum power output.
Regularly inspect the cable and connectors for signs of wear or damage. Discontinue use if any damage is found.
Only use with equally rated plug sockets, that can withstand the heat and power draw.
Make sure the fuse on your car or device does not exceed 15A. Do not rely on the device's internal fuse!
THE DEVICE CONTACTS CAN GET EXTREMELY HOT!
Do not leave the cable unattended. It may only be used for temporary and not for permanent installations and only when observed by someone capable of unplugging the device.

Compliance

Additional (compliance) labels for your region may be found on the packaging or the device itself.

Disposal

This appliance follows the European Union's WEEE directive (2012/19/EU) for responsible end-of-life handling.

Packaging: Eco-friendly materials make it easy to recycle. Send that cardboard on its next adventure or recycle it accordingly.
Waste equipment: Don't let it gather dust! Your local retailer or recycling center gladly welcomes it back for reuse or responsible recycling. Ask them for the latest disposal routes, and watch your old appliance become something new!

Installation

Make sure that the contacts of your plug socket and the adapter are free of any debris, or dust and corrosion. Any of the mentioned problems can cause a high contact resistance which may lead to additional heat dissipation and pose a fire hazard!

This device is only to be used in conjunction with compatible PoE-Injectors with Boost-Converters, Model Numbers:
(LG-)YSNEAPL12001A, (LG-)YSNEAPL12010B

Operation

Fully plug the device into the outlet while the power is off. Ensure it is seated properly. Then turn the power on. The red LED will start emitting light.

Maintenance

Maintain the device's cleanliness by regularly wiping it with a dry, lint-free cloth. Do not use harsh chemicals or abrasive materials to clean the device, as these may scratch or damage its surface. Coil loosely when not in use to prevent damage.
Store in a cool, dry place away from direct sunlight.

Imported by performeon UG (haftungsbeschränkt), Dachauer Str. 112, 80636 Munich, Germany
support@linkgear.net ● +49 (0) 89 2000 85 320

Manufactured by Shenzen Jinkaiming Electronics Co. Ltd. ● Floor 5, Building C, 28 Langbei Industrial Zone, Tongle Community, Longgang Street, Longgang District, Shenzhen, China ● jkm@gdjnkai.com