Manual & Safety

LinkGear Light-Mount for Starlink Gen 3

Model LG-SG3FL(-MIG/MIX)

Thank you for choosing our Light Mount for Starlink Standard (Gen 3, V4). This light mount is the perfect solution for temporarily mounting your Starlink Dish in a car, boat, or other place. 

⚠ Safety Instructions

• Before using the Mount, carefully read this manual.

• This device is not certified for use on moving objects, such as cars or mobile homes. It is intended for stationary use only. Store the device inside when in motion.

• Please pay attention to the specifications provided by Starlink in addition to the specifications we provide for the Mount.

• Do not use the Mount near flammable materials or in an explosive atmosphere.

Installation - Important Information!

Please make sure to mount the device using all 4 x M8 holes. Always use washers and do not excessively tighten the nuts. We recommend using a maximum force of 1.8 NM.

Operation

Slide your Starlink Gen 3 onto the mount and make sure it clicks securely in place. Always double-check that the dish is securely mounted by carefully trying to move it off the mount. To unmount the Starlink Gen 3, please make sure to unlock the locking mechanism on the bottom.

Maintenance

Regularly check the mounting points and screws to ensure they are tight and secure. Inspect the case periodically for signs of wear or damage. Clean the mount with a mild soap and water solution when necessary. Do not use any solvents. The top surface may show scratches. This has no impact on function and is a purely cosmetic effect. 

We are not affiliated, associated, authorized, endorsed by, or in any way officially connected with Starlink, SpaceX, or any of its subsidiaries or affiliates.

Manufactured by performeon GmbH, Rodgasse 5, 97828 Marktheidenfeld, Deutschland
support@linkgear.net ● +49 (0) 9391 6099 880