Manual & Safety
150W 2-In-1 4 Pair GigE PoE Injector & Adapter
Model LG-YSNEPPUCA1501
Thank you for choosing our 150W Gigabit-Ethernet PoE Injector with a built-in Adapter for the SPX connector.
Package Contents1 x PoE Injector |
⚠ WARNINGS & Safety Information
- Before using the device, carefully read this manual.
- Keep this manual either downloaded or printed in a safe place for later use. It contains important information.
- Never connect the device to 230/110/mains voltage! This is extremely dangerous.
- Avoid placing any objects that could short-circuit the input power cables.
- Securely connect the cables to the device by firmly inserting them into the cable connectors.
- Securely mount the device on a stable, level surface to prevent it from falling.
- Do not cover or obstruct the device to allow for proper heat dissipation.
- The device should not be opened or repaired by unauthorized personnel.
- To prevent damage from water or moisture, the device must not be used in wet or humid environments.
- Only use the device within the specified limits. Do not overload the device.
- Verify that the PoE adapter provides the correct power voltage for the device and that the power pins are compatible. For this model it will be +V: 1,2,3,6 -V: 4,5,7,8 - always verify on the device label!
- Ensure proper grounding by connecting the provided ground screw to a grounding point.
- Ensure you are using an appropriate wire diameter. Choosing the wrong wire diameter is a fire hazard!
Compliance
Additional (compliance) labels for your region may be found on the packaging or the device itself.
Disposal
This appliance follows the European Union's WEEE directive (2012/19/EU) for responsible end-of-life handling.
- Packaging: Eco-friendly materials make it easy to recycle. Send that cardboard on its next adventure or recycle it accordingly.
- Waste equipment: Don't let it gather dust! Your local retailer or recycling center gladly welcomes it back for reuse or responsible recycling. Ask them for the latest disposal routes, and watch your old appliance become something new!
If you have any issues, please contact our support team.
Installation
Attach cable connectors to the power cable. Connect the power cable to the positive and negative poles on the device. Make sure that your power supply is in the voltage range stated on the device and is outputting the correct voltage level for your PoE device.
Operation
Please only turn the device on or power it up after the PoE load is connected. Do not connect or disconnect the SPX plug while the device is powered on.
Maintenance
Maintain the device's cleanliness by regularly wiping it with a dry, lint-free cloth. Do not use harsh chemicals or abrasive materials to clean the device, as these may scratch or damage its surface.
Fuse
This device has a fuse that can be replaced by the user. If the fuse is broken, please do not attempt to replace it before identifying the cause of the issue. Once you have fixed the root cause of the problem, ensure that the device is powered off, remove the broken fuse and replace it with a new one. Be certain that the new fuse has the same rating as the original one.
Imported by
Manufactured by YiMotion Industries Co. Ltd, 6 Floor, Building 3, YESUN Life and Health Technology Park, Kengzi, Pingshan district, 518122 Shenzhen city, Guangdong province, China
No Comments